Wallingford Bridge

From Wikishire
Revision as of 10:07, 23 May 2017 by Owain (talk | contribs) (Created page with "{{infobox bridge |county=Berks |picture=UK-Wallingford_Bridge.JPG |picture caption= Wallingford Bridge from downstream |crosses=River Thames |design= arch |material= stone...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Wallingford Bridge
Berkshire

Wallingford Bridge from downstream
Location
Crossing: River Thames
Location
Location: 51°36’2"N, 1°7’14"W
Structure
Length: 900 ft
Design: arch
Material: stone
History
Information

Wallingford Bridge is a mediæval road bridge over the River Thames which connects Wallingford, Berkshire and Crowmarsh Gifford, Oxfordshire. The county border follows a ditch to the east of the present course of the Thames, placing the bridge entirely within Berkshire. It crosses the river on the reach between Cleeve Lock and Benson Lock. The bridge is 900 feet long and has 22 arches but most traffic now crosses Winterbrook Bridge, built as part of the by-pass to the south of the town in 1993.

History

The first reference to a bridge across the Thames between Wallingford and Crowmarsh Gifford is from 1141, when King Stephen besieged Wallingford Castle. The first stone bridge is credited to Richard, 1st Earl of Cornwall, and four remaining arches are believed to contain 13th-century elements. Major repairs used stone from the dissolved Holy Trinity Priory in 1530. Four arches were removed so a drawbridge could be inserted during the siege of the castle in the Civil War of 1646, and these were replaced with timber structures until repair in 1751. Following a flood, three arches were rebuilt by Richard Clarke from 1810-1812 to a design by John Treacher (1760-1836) developed in 1809, and a parapet and balustrade added.[1]

Bench marks

There are three Ordnance Survey bench marks on the bridge. A cut mark over the centre of the river on the south parapet,[2] another cut mark near the east end of the bridge on the north parapet[3] and a flush bracket numbered 11 used during the second geodetic levelling of England and Wales close to the river bank on the south side of the bridge.[4]

See also

References

  1. Thacker, Fred. S. (1968) [1920]. The Thames Highway: Volume II Locks and Weirs. Newton Abbot: David and Charles. p. not cited. 
  2. "Cut Mark: Wallingford Bridge, South Parapet". http://www.bench-marks.org.uk/bm21461. Retrieved 9 December 2016. 
  3. "Cut Mark: Wallingford Bridge, North Parapet". http://www.bench-marks.org.uk/bm21742. Retrieved 9 December 2016. 
  4. "Flush Bracket OSBM 11: Wallingford Bridge". http://www.bench-marks.org.uk/bm1. Retrieved 9 December 2016. 

Outside links