Tay Bridge, Aberfeldy

From Wikishire
Jump to navigation Jump to search
Wade's Bridge
Perthshire

The bridge in 2022
Location
Crossing: River Tay
Location
Location: 56°37’17"N, 3°52’25"W
Structure
Length: 367 ft
History
Built 1733
Architect: William Adam
Information

The Tay Bridge or Wade's Bridge is five-arch bridge crossing the River Tay at Aberfeldy, Perthshire. A Category A listed structure built in 1733,[1] to a design by William Adam, it carries the pedestrian and vehicle traffic of Poplar Avenue.[2] Erected for the Board of Ordnance, to the order of Lieutenant General George Wade, its original purpose was as a military road linking the garrisons at Ruthven, Fort George, Fort Augustus and Fort William.[3]

The stone was quarried, cut and tooled at nearby Bolfracks. In 1932, two tablets with copies of Wade's original inscriptions were let into the stonework of two obelisk plinths; one in English and one in Latin. These state that the bridge was begun in April 1733 and finished by January; however, this is not strictly true, as General Wade stopped work for the winter, leaving the bridge without parapets over the side arches. These were added the following year.[2]

References

  1. ↑ Ordnance Gazetteer of Scotland: A Graphic and Accurate Description of Every Place in Scotland, Francis Hindes Groome (1901)
  2. ↑ 2.0 2.1 Tay Bridge – Historic Environment Scotland
  3. ↑ Mackenzie, Sir Kenneth (13 April 1897). Paper entitled General Wade & his Roads. Inverness Scientific Society. 


Bridges and crossings on the River Tay
Kenmore Bridge Chinese Bridge Newhall Bridge Tay Bridge Aberfeldy Footbridge Grandtully Bridge Pitnacree Bridge

This Perthshire article is a stub: help to improve Wikishire by building it up.