Poole Bay

From Wikishire
Jump to: navigation, search
Poole Bay from Hengistbury Head

Poole Bay is a bay in the English Channel, on the coast of Dorset and Hampshire, which stretches 10 miles from Sandbanks at the mouth of Poole Harbour in the west, to Hengistbury Head in the east. Poole Bay is a relatively shallow embayment and consists of steep sandstone cliffs and several 'chines' that allow easy access to the sandy beaches below. The coast along the bay is continuously built up, and is part of the conurbation including parts of the towns of Poole, Bournemouth and Christchurch. The bay is often erroneously referred to as Bournemouth Bay,[1] because much of it is occupied by Bournemouth.

Measures to prevent coastal erosion have been deployed throughout the 20th century. Concrete seawalls and groynes allowed the construction of homes and roads on the clifftops, but prevented natural supply of sand and gravel to the shore. From 1970 to 2000 over 50 million cubic feet of sand was used to replenish the beaches at Bournemouth and Poole. Many of the beaches along Poole Bay were replenished during the winters of 2005 and 2006 with 40 million cubic feet of sand dredged from Poole Harbour and 25 million cubic feet of sand dredged from a Licensed Area off the Isle of Wight.[2] In 2015 a 17-year £43.7million project was approved to protect the beaches from further erosion over the next century. The plans involve replacing the groynes and adding new ones and replenishing the beaches with seven and a half million cubic feet of sand and gravel every three years.[3]

Geology

The area of Poole Bay was predominantly created during the Pleistocene period, when the Solent river ran across the whole of south-eastern Dorset and western Hampshire, out past the Isle of Wight The solid geology of the cliffs, and the seabed beneath Poole Bay, is composed of rocks of the Tertiary Bracklesham Group, consisting of a sequence of fine, medium and coarse sands. At Hengistbury Head there are younger rocks of the Bartonian group, forming an outlier. The Barton Clay here is made up of a series of sands and interbedded clays, with four distinct bands of ironstone nodules. These formations dip eastwards and are cut out by a north-west to south-east trending fault. This defines the eastwards boundary of Christchurch Ledge, which is a seawards continuation of the resistant ironstone strata exposed in Hengistbury Head.

References

Outside links