Richmond Railway Bridge

From Wikishire
Jump to: navigation, search
Richmond Railway Bridge
Middlesex, Surrey
Richmond Railway Bridge 333r1.jpg
Richmond Railway Bridge looking downstream
Location
Carrying: Railway
Crossing: River Thames
Location
Grid reference: TQ17267480
Location: 51°27’36"N, 0°18’49"W
Structure
Length: 300 feet
Design: Truss arch bridge
Material: Steel
History
Information

Richmond Railway Bridge crosses the River Thames immediately upstream of Twickenham Bridge, in a west-east direction between Twickenham in Middlesex and Richmond in Surrey. It carries trains on the Waterloo to Reading Line, between Richmond and St Margarets stations.

After the railway came to Richmond station in 1846, the line was extended to Windsor. Joseph Locke and J E Errington designed the original bridge, and a similar bridge, Barnes Bridge downstream at Barnes, with three 100-foot cast iron girders supported on stone-faced land arches with two stone-faced river piers.[1] Due to concerns over its structural integrity, the bridge was rebuilt in 1908 reusing the existing piers and abutments to a design by the London & South Western Railway's chief engineer, J W Jacomb-Hood.

The main bridge girders and decking were replaced in 1984.[2]

The bridge and the approach viaduct, which crosses Richmond's Old Deer Park, was declared a Grade II listed structure in 2008,[3][4]

See also

Outside links

References

  1. Nikolaus Pevsner: Pevsner Architectural Guides
  2. Richmond Railway Bridge - Just Tour Ltd
  3. National Heritage List 1393016: Richmond Railway Bridge and Approach Viaduct
  4. London bridges get listed status’ - BBC News 26 November 2008


Bridges and crossings on the River Thames
Teddington Lock Hammerton's Ferry Richmond Bridge Richmond Railway Bridge Twickenham Bridge Richmond Lock Kew Bridge